A blog about SCAMP (Small Craft Advisor Magazine Project) boats. Covering the build, sailing the boat and the scamp community that has formed around this little portly boat.

Thursday, December 25, 2014

Christmas sanding and drilling

Today I was able to sand down the seats and drill the holes for the motor mount.
For christmas, I was given a drill guide to drill straight holes. It worked well to drill oversize holes for the motor mounts on the transom. Since the holes are oversize, I will fill with epoxy, then drill out 1/4" holes for the 1/4-20 bolts I will be using to hold on the aluminum motor guides.

It's really too cold to do much epoxy work.

Merry Christmas everyone!

No comments:

Post a Comment